All DuraFon 1X handsets are registered to the primary Base. When a second Base is registered, then all handsets have access to that base. All incoming calls on each Line/Base will alert any handset within range (depending on Group configuration. For outgoing calls, the handset will select the Base/Line with the strongest signal. If you want to select a specific base station to make outgoing call:
Press menu 8 to enter the Call Manager function.
Press 2 to enter “Outgoing” setting.
Use Up and Down arrows to select either On or Off.
Scroll to On and press SAVE if you want to select a specific base station before you make an outgoing call. The default setting is Off.
See Call Manager functions below:
“Call Manager” feature allows the handset to be set to receive all incoming, transferred, and 2-Way/Intercom calls OR just transferred and 2-Way/Intercom calls. The option is selectable by base 1 to base 4. Besides, this feature allows you to select a specific base station to make an outgoing call.
Decide whether to receive the incoming, transferred, and 2-Way/Intercom calls from a specific base station:
Press menu 8 to enter the Call Manager function. The screen will display:
Press 1 to enter “incoming” setting.
Use
(up) and
(down) keys to select a base from base 1 to base 4.
Then press the
key to switch between Yes and No, then press SAVE to confirm the setting.
Repeat the process until all base stations from which calls are to be accepted have been selected for the handset.
Decide whether to select a specific base station to make outgoing call:
Press menu 8 to enter the Call Manager function.
Press 2 to enter “Outgoing” setting.
Use
(up) and
(down) to select either On or Off.
Scroll to On and press
if you want to select a specific base station before you make an outgoing call. The default setting is Off.