Power on both the DURAFON1X Base Station and Handset.

Set the DURAFON1X handset to registration Mode by pressing Menu Button and 6

Set the DURAFON1X base station to registration mode by pressing and holding the REG Button.

Wait for all 4 LEDs to illuminate. Once all 4 LEDs illuminated, release the REG Button.

Select Register on the handset by pressing 1.

If the registration is successful, you will see on the handset’s screen “Registration Complete”.

NOTE: The 1x system supports up to 9 handsets, with handset ID’s from 11-19. If you get a “table full” error, then the base does not have anymore handset ID’s available. You may need to reset the base to start over with handset registrations (ID’s will start from 11 again).