By default, VLAN 1 is the native VLAN and is untagged. In this example, the user would like to have VLAN 2 as untagged on ports 4 and 5 on the switch with VLAN 1 tagged on those same ports.
1. Access the switch graphical user interface (GUI) and add VLAN 2 on 802.1Q table.
2. Edit the settings of VLAN 1 and set ports 4 and 5 as tagged.
3. Edit the settings of VLAN 2 and set ports 4 and 5 as untagged.
4. Go to the PVID page and set the PVID of ports 4 and 5 to 2 instead of 1.