All Collections
Wireless Networking
Monitoring Active Clients and Rogue AP Detection on ezMaster
Monitoring Active Clients and Rogue AP Detection on ezMaster
Updated over a week ago

Please make sure that ezMaster software is active/running on a host computer

Login to ezMaster software: (default username is admin and password is “password”)

Select your project


Active Clients:

From here, you can view client information, as well as temporarily disconnect or permanently block the wireless clients that are associated with the Access Points. ezMaster is able to identify client devices utilizing DHCP by their Operating System, device type and host name, if available. If multiple Access Points are connected to the network, use the search bar to find an Access Point by its name.

Kick/Ban Client

Use the Kick function to temporarily disconnect a wireless client from the network. The disconnected client can simply reconnect manually if they wish to.

Use the Ban function to permanently block a wireless client from the network.

Go to Device Management > Access Control to unblock the wireless client.

Search Bar

Use the Search Bar to search for Wireless Clients managed by the EWS Switch using the following criteria:
Client Name, Client IP, Client MAC Address, Client OS, AP Device Name, AP MAC Address, Model Name,
SSID, Band, TX Traffic, RX Traffic.

Rogue AP Detection

The Rogue AP Detection feature on the ezMaster is a useful feature to scan for Wi-Fi networks in the area thus identifying potential sources of wireless interference.

For Rogue AP Detection to work, enable Background Scanning (2.4GHz and 5GHz for Dual-band Neutron APs).

Did this answer your question?