#1 Pole Mounting:
A. Put the included rubber
into the bracket
B. Plug the dynamic stick
into the bracket
C. Screw the sealing nut
and assembled parts, as well as tighten it.
D. Put the nock washer
on the dynamic stick
E. Assemble the mounting parts to the Enstation
F. Thread the open end of the of the pole srap through the two tabs on the bracket.
G. Lock and tighten pole strap to secure bracket to the pole
#2 Wall Mounting:
A. Put the included rubber
into the bracket
B. Plug the dynamic stick
into the bracket
C. Screw the sealing nut
and assembled parts, as well as tighten it.
D. Put the nock washer
on the dynamic stick
E. Assemble the mounting parts to the Enstation
F. Determine the mounting location. Mark and drill two pilot holes aligning to the screw holes of the bracket
G. Put the wall anchors
into the holes and insert screw
into the wall anchor
H. Screw and secure the bracket in place
